Reset procedures
How to use the Reset button
Press and hold the Reset button for more than 20 seconds. Release the button when the LED blinks red.
Allow two to four minutes for the AP to restart and load the factory default settings, then log into the AP using the default username and password (araknis; araknis) and configure the AP like new, or upload a configuration file.
|
Reset Button Action |
LED State |
Description |
|---|---|---|
|
Hold the reset button for 1-9 seconds |
Blinking Green |
Restarts the AP |
|
Hold the reset button for 10-19 seconds* |
Blinking Orange |
Only resets the username and password |
|
Hold the reset button for more than 20 seconds |
Blinking Red |
Resets the AP to factory defaults |
*This action is only available when the Reset Password toggle is disabled in the web interface.